Does a Glock 43 Holster Fit a Glock 43X? (Here’s the Real Answer)
Share
You have an old holster in a drawer that carried your Glock 43 for years, and a new 43X on the counter. Same slide, same barrel, same family name. The only obvious difference is a longer grip, and the question writes itself: will the old holster work?
The common reaction is that the longer grip must mean a different holster, and that’s a reasonable guess. It’s only part of the story. Whether one holster fits both guns comes down to what the shell actually holds, and that’s something you can check in about a minute if you know where to look.
A Glock 43 and a Glock 43X have the same 3.41 inch barrel and the same slide length and width, but the 43X has a longer grip. CYA’s product pages list the Path IWB for the 43, 43X and 43X MOS together, while the Base and Ridge are listed separately for the 43 and for the 43X. Always go by the compatibility list on the exact product page.
What actually differs between the 43 and the 43X
The 43X was introduced in 2019 as a longer-gripped version of the 43. These numbers come from Glock’s own spec pages for the G43 and the G43X:
|
Glock 43 |
Glock 43X |
|
|
Standard capacity |
6 |
10 |
|
Barrel length |
3.41 in |
3.41 in |
|
Slide length |
6.06 in |
6.06 in |
|
Slide width |
0.87 in |
0.87 in |
|
Overall length |
6.26 in |
6.50 in |
|
Overall width |
1.06 in |
1.10 in |
|
Height with magazine |
4.25 in |
5.04 in |
|
Weight with loaded magazine |
20.64 oz |
23.07 oz |
Read the top half of that table and the two guns are twins: same barrel, same slide length, same slide width. Read the bottom half and the 43X is clearly the bigger gun, almost 0.8 inch taller with a 10-round flush magazine in place of a 6-round one.
The MOS version of the 43X adds two more things. Glock introduced the 43X MOS in 2020 with a milled optic cut in the slide and a slim accessory rail. If you’re shopping for a red dot, our Glock 43X MOS red dot guide covers the upgrade side.
Why the grip length matters less than people think
An inside-the-waistband holster is mostly a shell for two parts of the pistol: the slide and the trigger guard. The shell covers those, holds the gun by them, and leaves the grip above and outside the holster where you can reach it. In general, that means a longer grip changes how much gun is sticking up out of the holster more than it changes how the holster grips the gun.
That’s the reason a single shell can sometimes be molded to carry two guns that share a slide. It’s also why you can’t stop there. Every holster maker draws the line somewhere different. Some list one holster for both the 43 and 43X, and some list them separately, and a few details outside the slide (the trigger guard, the frame width, how the shell is set up at the retention point) can matter more than the grip length ever does.
So the real answer to “does a 43 holster fit a 43X” is not a yes or a no. It’s this: it fits if the maker lists it for both, and not otherwise. A holster that isn’t listed for your gun isn’t a holster you should trust with it, because the trigger guard has to be fully covered and the retention has to be consistent, and neither of those is something you want to find out about on a belt.
Which CYA holster lists which gun
Here’s what CYA’s product pages say today, checked directly:
|
CYA holster |
Glock 43 |
Glock 43X |
Glock 43X MOS |
|
Listed |
Not listed |
Not listed |
|
|
Not listed |
Listed |
Listed |
|
|
Listed |
Not listed |
Not listed |
|
|
Not listed |
Listed |
Listed |
|
|
Listed |
Listed |
Listed |
|
|
Listed |
Listed |
Listed |
“Not listed” means exactly that: the gun isn’t on that page’s compatibility list. It’s not a statement that the holster can’t work. It’s a statement that CYA hasn’t listed it, and the safe move is to buy the holster that lists your gun.
The pattern is simple. On the BASE and RIDGE, buy the one made for your gun. On the PATH, both pages list the 43, 43X and 43X MOS, each with a 3.41 inch barrel noted, so it is the one to look at if you own both guns or might switch between them. Both Path pages are described as built from a 3D scan of their own named gun, so if you want to be sure which shell is which, the contact page is the place to ask.
Here’s how two Path buyers describe the result, one on each gun:
“It is the first AIWB holster that conceals my firearm to my satisfaction without printing.” Arthur M., verified buyer, on the Glock 43 PATH IWB
“The way it conceals under his shirts and stays concealed.” Karla H., verified buyer, on the Glock 43X PATH IWB
What changes with the MOS optic cut
Less than people expect. CYA lists the 43X and the 43X MOS together on every 43X holster above, so there’s no separate MOS holster to hunt for. The BASE, RIDGE and PATH pages for the 43X each offer an Optics Ready cut, and each page says the cut is compatible with or without an optic, so you can buy it now and add the dot later. The BASE page also offers a No Optics version.
Two caveats are worth saying out loud. First, the optic cut is about the red dot, not the gun’s frame. Second, the MOS also adds a slim rail, and CYA’s pages say these holsters are not compatible with weapon-mounted lights or lasers. If you run a light on the rail, these are not the holsters for that setup.
Check before you buy
You can answer almost every fit question yourself by reading the product page the way a careful shopper would.
Read the compatibility list, not the title. The title tells you what the holster was named for. The “Compatible Models” list tells you what the maker will stand behind.
Check the variants. Hand orientation, color and optics cut are separate choices on the page. Make sure the one you pick is in stock for your gun and your draw hand.
Look at “Not Compatible With.” On these holsters it includes weapon-mounted lights and lasers, and on the BASE it also lists the claw attachment and front suppressor sights.
Don’t assume the same barrel length means the same holster. It’s a good sign, and it’s why the Path pages call out 3.41 inches for all three guns, but it’s the maker’s list that settles it. CYA’s Best IWB Holster: Stop Buying the List, Start Buying the Fit makes the broader case.
If the list doesn’t answer your question, the holster finder shows what CYA makes for your model, and the contact page is the fastest way to ask about a specific pairing before you order.
Why the material and mold matter
CYA molds each holster in 0.080 inch Boltaron, not Kydex. The two are in the same thermoplastic family, but Boltaron has higher impact resistance, better surface hardness and a wider safety margin under heat, and CYA explains the details in Boltaron vs Kydex: The Real Differences That Matter for Holsters. The material only helps if the mold underneath it matches your gun, which is the reason the compatibility list matters so much. Each CYA holster is molded on the real pistol it’s named for, not a stand-in.
Which gun should you choose?
If you landed here comparing the guns and not the holsters, the short version is this. The 43 is the deeper-concealment gun: shorter, lighter, with a 6-round magazine and a grip about 0.8 inch shorter. The 43X trades a little concealment for a full firing grip and 10 rounds, and it is the one most people end up preferring. We make the case in Is the Glock 43X the Best EDC Gun?, and if you’re comparing smaller guns, Glock 42 vs. 43 covers the step down. Concealment is a placement question as much as a size one, so How to Prevent Printing When Concealed Carrying is worth a read either way, and the full Glock IWB collection is there once you’ve decided.
Frequently asked questions
Does a Glock 43 holster fit a Glock 43X?
Only if the maker lists it for both guns. The two share a barrel, slide length and slide width, but the 43X has a longer, wider frame. CYA’s Path IWB pages list both guns. The BASE and RIDGE are listed separately for each.
Can I use a Glock 43X holster on a Glock 43?
The same rule applies. CYA’s 43X BASE and RIDGE pages list the 43X and 43X MOS, not the 43. The PATH pages list all three.
Do I need a different holster for the 43X MOS?
Not on CYA’s listings. The BASE, RIDGE and PATH pages for the 43X each list the 43X and the 43X MOS together, with an Optics Ready cut that works with or without a red dot.
Do these holsters fit a weapon light or laser?
No. CYA’s pages list weapon-mounted lights and lasers as not compatible.
Do I need a different holster for the Glock 48?
Yes. The 48 shares the 43X frame but has a longer slide and barrel, and CYA’s 43 and 43X pages don’t list it. The 48 has its own holsters, starting with the Glock 48 RIDGE IWB.
Are CYA holsters made of Kydex?
No. They are made from 0.080 inch Boltaron, a thermoplastic in the same family as Kydex.
Justin Hunold
Firearms Writer and Firearms Expert
Justin Hunold is a firearms writer and lifelong shooter who spent more than ten years behind the gun counter at Bass Pro Shops and Dick's Sporting Goods, helping thousands of customers — first-time handgun buyers, everyday concealed carriers, hunters, competitive shooters, and law enforcement officers — find the firearm and gear that actually fit their needs.