Winter Concealed Carry: 8 Checks Before You Head Out

Your first encounter with an equipment or clothing problem shouldn't be when you're depending on that equipment.

In the Marine Corps, we had a saying: Train how you fight. The same principle applies to concealed carry. If you're going to carry in winter clothing, you need to practice in winter clothing.

A hoodie, jacket, heavier pants, or gloves can change how your setup fits, conceals, and handles. You don't want to discover those differences when you're depending on your equipment.

I've been designing holsters for over ten years, and I carry every day. Here are eight checks I make or recommend when the weather changes.

1. Practice in Your Winter Clothes

Train like you fight: with the clothing you're actually going to wear.

A draw that works with a T-shirt isn't necessarily going to work the same way under a hoodie or jacket. I live my life at close to 100° here in Texas so in the winter I usually wear my Carhartt Jacket. The draw takes a lot my effort. Heavier fabric, additional layers, and drawstrings introduce different handling and snagging considerations.

I practice drawing and dry-firing with a verified cleared firearm, with live ammunition removed from the practice area. If you're uncomfortable doing that, a blue gun is an option.

Practice in your actual clothing combinations. Jacket open, jacket closed, gloves on, gloves off. Pay attention to anything that interferes with safe handling and address it. It is easier to change your clothing choices than it is to deal with a clothing malfunction in the field when it matters most. Don't assume you'll be able to work if the need ever arises.

2. Recheck Your Ride Height

No single ride height is ideal for everyone, and your ideal ride height can change with your clothing.

I generally carry a little higher during the winter. It can make the firearm print more, but the heavier, looser clothing I wear gives me additional room to conceal it.

That doesn't mean everyone should carry higher. Your body type, firearm, holster, carry position, and clothing all play a role. I carry appendix, have a lean build, and carry a Path IWB so this works for me. 

Check your ride height with your jacket on and off. Make sure your setup remains comfortable, concealable, secure, and accessible.

I designed the CYA Path IWB Holster with adjustable ride height because I wanted users to be able to find what works for their individual setup.

If you change your ride height, check your retention again with the holster mounted on your belt.

Check out Path IWB Holsters →

3. Check Your Gloves

Gloves change the thickness of your fingers and reduce your tactile feedback. Check that they work with your firearm.

Bulkier gloves can crowd the trigger guard or interfere with handling. Don't assume that because a pair of gloves is comfortable, it's suitable for your carry setup.

With a verified cleared firearm, check your gloves during safely set-up dry-fire practice. Pay attention to trigger-guard clearance and any material that bunches or catches.

If the gloves interfere, you can change the gloves, or change the firearm. Like I said before I switch to the 19x in the winter, it has a bit more trigger guard room than the G43x.

Get familiar with the gloves you'll actually wear, and confirm their suitability during live-fire training.

4. Practice reholstering in what you will wear

Practice reholstering in your winter clothes with a verified cleared firearm. Keep clothing, drawstrings, and other obstructions clear of the holster opening. Never force the firearm into the holster.

Reduced tactile senses with thicker clothes and colder weather complicate everything. Hoodies and jackets add drawcords, toggles, and loose fabric near the holster. Keep your finger clear of the trigger, make sure the holster opening is unobstructed. Take your time. Stop if something catches or resists. Do not push through it. 

Practice with the full outfit. A clear holster opening in summer does not tell you what a winter coat will do.

5. Check Retention With the Holster on Your Belt

Don't judge holster retention by squeezing the holster in your hand. Check it the way you actually wear it.

At SHOT Show, I regularly see people—even firearms instructors—check holster retention by gripping the shell from the top of the slide down to the trigger guard.

Here's the problem.

Our holsters use a retention detent around the trigger-guard area and fold along the top of the slide. The retention screws add pressure to that detent which acts like a leave spring. When you squeeze the shell, you're applying additional pressure that makes the holster feel tighter than it actually is. I've seen big buff guys struggle to draw from the holster even though we had retention set down knowing people would do this. 

For an initial retention check, hold the holster by its clip without squeezing the shell. Pinche the two long sides where those arches are between your thumb and your booger finger.

Once you get that to a decent spot, mount it on your belt at your normal belt tightness, and check there.

I'm going to stress normal belt tightness because your belt applies pressure to the holster, which can also change retention. That's why testing it in your hand isn't enough.

Check it every time you belt up. 

Don't Forget the Hardware

Check for loose mounting screws. Always add thread locker to screws, just a dab will do ya. More isn't necessarily better. Loctite says it takes 24 hours to cure. See their instructions here.

6. Plan for Taking Your Coat Off

Your concealment shouldn't depend entirely on your winter jacket.

I carry my Glock 19X in winter because heavier clothing makes it easier to conceal, it has a bigger grip for better purchase, and more rounds.

I also wear a loose-fitting, heavyweight shirt under my outer layers—often a Carhartt shirt. That gives me the option of taking my jacket off indoors without losing concealment.

Don't wear your hoochie shirt underneath, or you'll end up sweating it out when you walk into a heated building.

Check your setup with your coat on and off before you leave home.

 

7. Check your optic for lint

Check your carry optic for clothing lint on the glass and around any exposed emitter. Follow the optic maker’s cleaning instructions to keep the sight picture clear.

Clothing can shed debris into the optic. Check that the sight picture is clear and the dot appears normally. Follow the optic maker’s cleaning instructions; remove loose dust before wiping the glass and use approved lens-cleaning materials. An enclosed emitter still leaves exterior glass to clean.

A gentle lens blower may be appropriate if your manufacturer allows it. Do not assume every solvent, swab, or compressed-air product is safe for every optic.

 

8. Clean both the firearm and the holster after sweating

After a sweaty day, inspect and dry both your carry firearm and the inside of the holster’s sweat guard. Winter clothing can make you sweat indoors, and a sweat guard does not keep all moisture out.

Safely unload before maintenance and follow the firearm and holster makers’ cleaning instructions. Check the surfaces that sit against each other instead of leaving the firearm in the holster for weeks without inspection.

Finishes need different care. Parkerizing has a porous structure that holds protective oil; Brownells describes this oil retention as part of its rust protection. A dry, neglected finish is not immune to corrosion. Use the firearm maker’s recommended protection rather than assuming every finish needs the same treatment.

See more on rust in our Can Sweat Rust Your Gun? article.

 

Check Your Entire Setup

Your holster is only one part of your carry setup.

Your clothing, belt, gloves, firearm, and holster all have to work together. Changing one can affect the others.

Before you replace equipment, figure out what's actually causing the problem. Sometimes it's a ride-height adjustment. Sometimes it's a different shirt or pair of gloves.

The important thing is finding those problems before you're depending on your equipment.

Train how you fight. Check your setup when your clothing changes.

Ronnie Hiles

President & Founder

Ronnie Hiles is President and Founder of CYA Supply Co., a US Marine veteran, and a daily concealed carrier. He has 10 years of hands-on experience designing holsters, from building molds by hand to designing tooling in CAD and machining it on CNC equipment. His work includes 3D scanning firearms and accessories and reverse engineering for holster development.

Back to blog